INSTITUTE OF TECHNOLOGY OF METALS
  
 



LANGUAGE
  • Russian

  • INSTITUTE
  • Institute
  • Main directions of scientific research work
  • Structure
  • Contacts
  • Cooperation

  • DEVELOPMENTS OF THE INSTITUTE
  • Continuous casting
  • Freezing-up casting
  • Bimetals
  • Silumins
  • Simulation of casting processes
  • Water analog simulation of die casting
  • Electroslag casting

  • CORROSION
  • Development of diagnosis system of the metal surface damage
  • Development of prognosis system of the steel surface damage by the Light Section Profiling System (LSP system) in high-speed production process
  • Development of prognosis system of the steel bulk property claim by the magnetic detection method in continuous production process
  • Diagnosis system of quality control and process control by digital image analysis
  • Universal magnetic thickness gage
  • Development of anti-corrosive active polymer film for steel packing

  • COATINGS
  • Magnetic Impulse Hardening
  • Cladding
  • IMM (Induction Metallurgical Method) Surface Hardening
  • Thermal Spray Coating Process
  • Flame Spray
  • Detonation Flame Spraying
  • Nontransferred Plasma Arc Spraying
  • Electric Arc Spraying
  • Activated arc spray- Hypersonic metallization
  • High-Frequency Pulse Hardening of Surfaces
  • Wire Arc Coatings
  • Metallization Of Ferrites And Creation Of Fixed Compositions Ferrite-metal

  • TECHNOLOGIES AND EQUIPMENT
  • Equipment For Surface Metallization And Blazing Of Oxide Materials
  • for continuous casting of cast iron and nonferrous metals
  • for battery grid casting
  • for continuous casting of CuCl belt
  • Plant for continuous casting of copper, aluminum, gold, silver, solder wires
  • DEVEOPMENT OF THE INSTITUTE :: Wire Arc Coatings

            In wire Arc coating, the starting wire feedstock, usually 1/16 in diameter may be composed of essentially any material that can be purchased at this size.

            Two wires with an electrical potential are brought together at an angle of about 20 degrees. A current is drawn through the wires and they ?melt? at their point of contact. An atomizing gas propels the molten particles at the substrate at low velocity. PTI applies about 10 different materials by this technique.

     

     

    Copyright © 2019 Institute Of Technology Of Metals Of National Academy Of Sciences Of Belarus